AEC

Applications :

Designed with a layer of spiral coated hot melt adhesive in the internal surface of the end cap, which provides highly resistant to moisture, fungus, and corrosion, and recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths.

Operating temperature range:

Operating temperature : -55^oC ~ 110^oC
Minimum shrink temperature : 80^oC
Minimum fully recovery temperature : 120^oC

Color :

Color : Black

End cap with valve is available on request.

Download Catalogue

Shrinkable Ratio: 2:1
Electrical insulation to 1000V
Easy installation over the cable end
Abrasion resistance and mechanical protection
EVA hot melt adhesive or Polyamide hot-melt adhesive for pressuried cable can be employed for inner spiral coated adhesive

Part No.	As supplied (mm)	After recovered (mm)				Cable diameter (mm)
Part No.	H(min)	H(max)	A(±10%)	L(±10%)	W(±10%)	Cable diameter (mm)
Standard length
AEC012	12	4.0	15	40	2.6	4 - 10
AEC014	14	5.0	18	45	2.2	5 - 12
AEC020	20	6.0	25	55	2.8	6 - 16
AEC025	25	8.5	30	68	2.8	10 - 20
AEC035	35	16.0	35	83	3.3	17 - 30
AEC040	40	15.0	40	83	3.3	18 - 32
AEC055	55	26.0	50	103	3.5	28 - 48
AEC075	75	36.0	55	120	4.0	45 - 68
AEC0100	100	52.0	70	140	4.0	55 - 90
AEC0120	120	60.0	70	150	4.0	65 - 110
AEC0145	145	60.0	70	150	4.0	70 - 130
AEC0160	160	82.0	70	150	4.0	90 - 150
AEC0200	200	90.0	70	160	4.2	100 - 180

Property	Test Method	Typical Value
Operating temperature	IEC 216	-55℃ to +110℃
Tensile strength	ASTM D 638	>14 MPa
Elongation at break	ASTM D 638	>400%
Density	ASTM D 792	1.05
Elongation at break after aging	150℃, 168hrs	>300%
Dielectric strength	IEC 243	>15KV/mm
Volume resistance	IEC 93	>10¹⁴Ω.cm

AEC - Heat Shrinkable Cable End Cap